No products
View larger
ASTM D3326-07(2017)
New product
ASTM D3326-07(2017)
Standard Practice for Preparation of Samples for Identification of Waterborne OilsMore info
1.1 This practice covers the preparation for analysis of waterborne oils recovered from water. The identification is based upon the comparison of physical and chemical characteristics of the waterborne oils with oils from suspect sources. These oils may be of petroleum or vegetable/animal origin, or both. Seven procedures are given as follows:
|
| Sections |
| Procedure A (for samples of more than 50-mL volume containing significant quantities of hydrocarbons with boiling points above 280°C) | 8 to 12 |
| Procedure B (for samples containing significant quantities of hydrocarbons with boiling points above 280°C) | 13 to 17 |
| Procedure C (for waterborne oils containing significant amounts of components boiling below 280°C and to mixtures of these and higher boiling components) | 18 to 22 |
| Procedure D (for samples containing both petroleum and vegetable/animal derived oils) | 23 to 27 |
| Procedure E (for samples of light crudes and medium distillate fuels) | 28 to 34 |
| Procedure F (for thin films of oil-on-water) | 35 to 39 |
| Procedure G (for oil-soaked samples) | 40 to 44 |
| Author | ASTM |
|---|---|
| Editor | ASTM |
| Document type | Standard |
| Format | File |
| Confirmation date | 2017-12-15 |
| ICS | 75.080 : Petroleum products in general
|
| Number of pages | 8 |
| Replace | ASTM D3326-07(2011) |
| Set | ASTMVOL1102 |
| Year | 2007 |
| Document history | ASTM D3326-07(2011) |
| Country | USA |
| Keyword | ASTM 3326;ASTM D3326;ASTM D3326;10.1520/D3326-07R17 |