Cart
0
Product
Products
(empty)
No products
To be determined
Shipping
$0.00
Total
Product successfully added to your shopping cart
Quantity
Total
There are 0 items in your cart.
There is 1 item in your cart.
Total products
Total shipping
To be determined
Total
Reduced price!
View larger
View larger
FORD FLTM BA 115-01
New product
FORD FLTM BA 115-01 2013 Edition, December 9, 2013 FLOW DRILL SCREW SCHEDULE DEVELOPMENT ACCEPTANCE TEST FOR ALUMINUM, LOW CARBON STEEL SHEET AND EXTRUSIONS
More info
Description / Abstract:
Application
This procedure defines the acceptance test for Flow Drill Screw (FDS) schedule development for aluminum, low carbon steel sheet and extrusions. All such sheet material must pass minimum performance testing. Consult the appropriate Engineering Material Specification for material exceptions. Testing confirms that the correct screw and processing parameters were used to satisfactorily join materials together. Cross sections of the FDS joint must be evaluated to insure a robust joint. After the correct tooling has been identified, lap shear and coach peel samples are fabricated. Initial testing requires a sample size of 30 each for the strength tests. Samples are pulled on a tensile test machine.
This procedure defines the acceptance test for Flow Drill Screw (FDS) schedule development for aluminum, low carbon steel sheet and extrusions. All such sheet material must pass minimum performance testing. Consult the appropriate Engineering Material Specification for material exceptions. Testing confirms that the correct screw and processing parameters were used to satisfactorily join materials together. Cross sections of the FDS joint must be evaluated to insure a robust joint. After the correct tooling has been identified, lap shear and coach peel samples are fabricated. Initial testing requires a sample size of 30 each for the strength tests. Samples are pulled on a tensile test machine.