Cart
0
Product
Products
(empty)
No products
To be determined
Shipping
$0.00
Total
Product successfully added to your shopping cart
Quantity
Total
There are 0 items in your cart.
There is 1 item in your cart.
Total products
Total shipping
To be determined
Total
Reduced price!
View larger
View larger
More info
Description / Abstract:
This standard pertains to pulse transformers for use in
electronic equipment. For the various types of these transformers,
the peak power transmitted ranges from a few milliwatts to
kilowatts; and the peak voltage transmitted ranges from a few volts
to many kilovolts.
These transformers are required to transmit unipolar or bipolar pulses of voltage or current within speciÞed tolerances of amplitude and time when operated between specified impedances. They are typically used as coupling devices in electronic circuits. In blocking oscillators, they are connected to provide positive feedback in the circuit. In radar or similar use, they are used to couple the modulator to a magnetron, a klystron, a traveling-wave tube or a cross-Þeld amplifier load.
Whenever numerical values are indicated in this standard, they may be considered as recommended values. Section 6. describes the preferred transformer test methods and Appendix A contains alternate test methods.
These transformers are required to transmit unipolar or bipolar pulses of voltage or current within speciÞed tolerances of amplitude and time when operated between specified impedances. They are typically used as coupling devices in electronic circuits. In blocking oscillators, they are connected to provide positive feedback in the circuit. In radar or similar use, they are used to couple the modulator to a magnetron, a klystron, a traveling-wave tube or a cross-Þeld amplifier load.
Whenever numerical values are indicated in this standard, they may be considered as recommended values. Section 6. describes the preferred transformer test methods and Appendix A contains alternate test methods.