Cart
0
Product
Products
(empty)
No products
To be determined
Shipping
$0.00
Total
Product successfully added to your shopping cart
Quantity
Total
There are 0 items in your cart.
There is 1 item in your cart.
Total products
Total shipping
To be determined
Total
Reduced price!
View larger
View larger
IEEE 436
New product
IEEE 436 91st Edition, January 1, 1991 Guide for Making Corona (Partial Discharge) Measurements on Electronics Transformers
More info
Description / Abstract:
Foreword
This guide was written to provide electronics transformer engineers with a standard method for detecting and measuring corona (partial discharge) in electronics transformers. Since there is no simple definition or unit for corona, it is felt that a guide of this nature will be useful in establishing a common ground of understanding between transformer and systems design engineers and transformer manufacturers in the development of service and performance requirements.
This publication was prepared by the Insulation Systems Subcommittee of the Electronics Transformers Technical Committee of the IEEE Power Electronics Society. The Subcommittee membership was as follows:
R. A. Frantz, Chair
J. S. Andreeen
C. J. Elliott
H. Fickenscher
P. K. Goethe
R. R. Grant
H. E. Lee
D. N. Ratliff
R. L. Sell
B. D. Thackwray
R. M. Wozniak
When the Electronics Transformer Technical Committee approved this guide, the membership was as follows:
H. Fickenscher, Chair
E. D. Belanger
C. J. Elliott
R. A. Frantz
P. K. Goethe
J. Silgailis
J. Tardy
B. D. Thackwray
R. M. Wozniak
H. E. Lee
W. E. Lucarz
D. N. Ratliff
R. L. Sell
The following persons were on the balloting committee that approved this standard for submission to the IEEE Standards Board:
J. S. Andresen
E. D. Belanger
R. P. Carey
E. J. Elliott
H. Fickenscher
R. A. Frantz
P. K. Goethe
R. R. Grant
O. Kiltie
L. W. Kirkwood
H. E. Lee
R. Lee
H. W. Lord
W. Lucarz
D. Ratliff
R. L. Sell
J. Silgailis
J. Tardy
B. D. Thackwray
H. I. Tillinger
R. G. Wolpert
R. M. Wozniak
The final conditions for approval of this guide were met on February 11, 1991. This guide was conditionally approved by the IEEE Standards Board on September 28, 1990 with the following membership:
Marco W. Migliaro, Chair
James M. Daly, Vice Chair
Andrew G. Salem, Secretary
Dennis Bodson
Paul L. Borrill
Fletcher J. Buckley
Allen L. Clapp
Stephen R. Dillon
Donald C. Fleckenstein
Jay Forster*
Thomas L. Hannan
Kenneth D. Hendrix
John W. Horch
Joseph L. Koepfinger*
Irving Kolodny
Michael A. Lawler
Donald J. Loughry
John E. May, Jr.
Lawrence V. McCall
L. Bruce McClung
Donald T. Michael*
Stig Nilsson
Roy T. Oishi
Gay S. Robinson
Terrance R. Whittemore
Donald W. Zipse
Scope
This guide covers the detection of corona (partial discharge) and the measurement of its magnitude in electronics transformers. Test conditions, test apparatus, calibration, and test requirements are included.
This guide was written to provide electronics transformer engineers with a standard method for detecting and measuring corona (partial discharge) in electronics transformers. Since there is no simple definition or unit for corona, it is felt that a guide of this nature will be useful in establishing a common ground of understanding between transformer and systems design engineers and transformer manufacturers in the development of service and performance requirements.
This publication was prepared by the Insulation Systems Subcommittee of the Electronics Transformers Technical Committee of the IEEE Power Electronics Society. The Subcommittee membership was as follows:
R. A. Frantz, Chair
J. S. Andreeen
C. J. Elliott
H. Fickenscher
P. K. Goethe
R. R. Grant
H. E. Lee
D. N. Ratliff
R. L. Sell
B. D. Thackwray
R. M. Wozniak
When the Electronics Transformer Technical Committee approved this guide, the membership was as follows:
H. Fickenscher, Chair
E. D. Belanger
C. J. Elliott
R. A. Frantz
P. K. Goethe
J. Silgailis
J. Tardy
B. D. Thackwray
R. M. Wozniak
H. E. Lee
W. E. Lucarz
D. N. Ratliff
R. L. Sell
The following persons were on the balloting committee that approved this standard for submission to the IEEE Standards Board:
J. S. Andresen
E. D. Belanger
R. P. Carey
E. J. Elliott
H. Fickenscher
R. A. Frantz
P. K. Goethe
R. R. Grant
O. Kiltie
L. W. Kirkwood
H. E. Lee
R. Lee
H. W. Lord
W. Lucarz
D. Ratliff
R. L. Sell
J. Silgailis
J. Tardy
B. D. Thackwray
H. I. Tillinger
R. G. Wolpert
R. M. Wozniak
The final conditions for approval of this guide were met on February 11, 1991. This guide was conditionally approved by the IEEE Standards Board on September 28, 1990 with the following membership:
Marco W. Migliaro, Chair
James M. Daly, Vice Chair
Andrew G. Salem, Secretary
Dennis Bodson
Paul L. Borrill
Fletcher J. Buckley
Allen L. Clapp
Stephen R. Dillon
Donald C. Fleckenstein
Jay Forster*
Thomas L. Hannan
Kenneth D. Hendrix
John W. Horch
Joseph L. Koepfinger*
Irving Kolodny
Michael A. Lawler
Donald J. Loughry
John E. May, Jr.
Lawrence V. McCall
L. Bruce McClung
Donald T. Michael*
Stig Nilsson
Roy T. Oishi
Gay S. Robinson
Terrance R. Whittemore
Donald W. Zipse
Scope
This guide covers the detection of corona (partial discharge) and the measurement of its magnitude in electronics transformers. Test conditions, test apparatus, calibration, and test requirements are included.