Cart
0
Product
Products
(empty)
No products
To be determined
Shipping
$0.00
Total
Product successfully added to your shopping cart
Quantity
Total
There are 0 items in your cart.
There is 1 item in your cart.
Total products
Total shipping
To be determined
Total
Reduced price!
View larger
View larger
IEEE C135.61
New product
IEEE C135.61 1997 Edition, 1997 Standard for the Testing of Overhead Transmission and Distribution Line Hardware
More info
Description / Abstract:
This standard covers the requirements for mechanically testing
load-rated line hardware for use on transmission and distribution
facilities. This standard is intended to cover routine acceptance
testing. It is not intended for initial design tests. This standard
specifically addresses, but is not limited to, clevis and eye
fittings, Y-clevis fittings, socket fittings, ball fittings, chain
links, shackles, triangular and rectangular yoke plates, suspension
clamps, and strain clamps. This standard may be applied to other
line hardware as agreed upon by the manufacturer and the end
user.
Purpose
All load-rated line hardware conforming to the requirements of this standard shall, in all respects, meet the acceptance criteria in Clause 5, when tested in accordance with the procedures outlined in Clause 6.
Purpose
All load-rated line hardware conforming to the requirements of this standard shall, in all respects, meet the acceptance criteria in Clause 5, when tested in accordance with the procedures outlined in Clause 6.