Cart
0
Product
Products
(empty)
No products
To be determined
Shipping
$0.00
Total
Product successfully added to your shopping cart
Quantity
Total
There are 0 items in your cart.
There is 1 item in your cart.
Total products
Total shipping
To be determined
Total
Reduced price!
View larger
View larger
IEEE C135.64
New product
IEEE C135.64 2012 Edition, May 14, 2012 Guide for Slip and Pull-Out Strength Testing of Bolted Dead End Strain Clamps
More info
Description / Abstract:
This guide defines testing procedures for the slip and pull-out
strength testing of bolted dead end strain clamps for use on
transmission and distribution lines. This guide covers initial
certification testing. For routine acceptance testing, refer to
IEEE Std C135.61TM.1
Purpose
The purpose of this guide is to provide a repeatable and standardized methodology for performing mechanical slip and pull-out strength testing for a bolted dead end clamp and conductor combination. A bolted dead end clamp and conductor combination tested in accordance with this guide should give reasonable assurance to the user that the clamp and conductor combination will perform in a satisfactory manner, provided they have been installed in accordance with the manufacturer's recommendations.
1 Information on references can be found in Clause 2.
Purpose
The purpose of this guide is to provide a repeatable and standardized methodology for performing mechanical slip and pull-out strength testing for a bolted dead end clamp and conductor combination. A bolted dead end clamp and conductor combination tested in accordance with this guide should give reasonable assurance to the user that the clamp and conductor combination will perform in a satisfactory manner, provided they have been installed in accordance with the manufacturer's recommendations.
1 Information on references can be found in Clause 2.