Cart
0
Product
Products
(empty)
No products
To be determined
Shipping
$0.00
Total
Product successfully added to your shopping cart
Quantity
Total
There are 0 items in your cart.
There is 1 item in your cart.
Total products
Total shipping
To be determined
Total
Reduced price!
View larger
View larger
ASME B5.50
New product
ASME B5.50 2015 Edition, September 30, 2015 7/24 Taper Tool to Spindle Connection for Automatic Tool Change
More info
Description / Abstract:
This Standard pertains to the standardization of basic
toolholder shank, retention knob, and socket assemblies for
numerically controlled machining centers with automatic tool
changers. The requirements contained herein are intended to provide
toolholder interchangeability between machining centers with
automatic tool changers of various types. This Standard is the inch
solution for basic toolholder shank, retention knob, and socket
assemblies. This design specifies an interchangeable retention knob
with a 45-deg clamping surface.
Section 2 of this Standard specifies the dimensions and tolerances of toolholder shanks having 7/24 tapers intended for automatic tool change. These are intended for use with the corresponding basic retention knob and spindle sockets specified in sections 3 and 4 (see Table 1).
Section 3 contains information for standardization of retention knobs for use with the 7/24 connection system described herein (see Table 2).
Section 4 specifies the dimensions and tolerances of spindle sockets, drive keys, and key seats for machine tool spindles having 7/24 tapers intended for automatic tool change (see Table 3 and Fig. 1). These are intended for use with the corresponding basic toolholder shank and retention knob specified in sections 2 and 3.
Section 2 of this Standard specifies the dimensions and tolerances of toolholder shanks having 7/24 tapers intended for automatic tool change. These are intended for use with the corresponding basic retention knob and spindle sockets specified in sections 3 and 4 (see Table 1).
Section 3 contains information for standardization of retention knobs for use with the 7/24 connection system described herein (see Table 2).
Section 4 specifies the dimensions and tolerances of spindle sockets, drive keys, and key seats for machine tool spindles having 7/24 tapers intended for automatic tool change (see Table 3 and Fig. 1). These are intended for use with the corresponding basic toolholder shank and retention knob specified in sections 2 and 3.