Cart
0
Product
Products
(empty)
No products
To be determined
Shipping
$0.00
Total
Product successfully added to your shopping cart
Quantity
Total
There are 0 items in your cart.
There is 1 item in your cart.
Total products
Total shipping
To be determined
Total
Reduced price!
View larger
View larger
ANSI B16.37
New product
ANSI B16.37 1980 Edition, December 15, 1980 HYDROSTATIC TESTING OF CONTROL VALVES
More info
Description / Abstract:
This standard applies to control valves having bodies, bonnets
and cover plates made of carbon steel, low alloy and high alloy
(stainless) steel, cast iron and ductile iron.
It establishes requirements and definitions for standard hydrostatic shell testing of Control Valves by the valve manufacturer to prove the structural integrity and leak tightness of the valve pressure retaining parts including any closure parts such as the valve body to bonnet joint and packing leakoff connection but excluding packings, bellows or other moving seals. Bellows or similar moving stem seals shall be pressure tested after their assembly at a pressure to be agreed upon between the valve manufacturer and the purchaser. Internally lined valves and pneumatic or hydraulic actuators are not subject to the requirements of this standard.
It establishes requirements and definitions for standard hydrostatic shell testing of Control Valves by the valve manufacturer to prove the structural integrity and leak tightness of the valve pressure retaining parts including any closure parts such as the valve body to bonnet joint and packing leakoff connection but excluding packings, bellows or other moving seals. Bellows or similar moving stem seals shall be pressure tested after their assembly at a pressure to be agreed upon between the valve manufacturer and the purchaser. Internally lined valves and pneumatic or hydraulic actuators are not subject to the requirements of this standard.