No products
AS ISO 7.1-2008 [ Current ] Pipe threads where pressure-tight joints are made on the threads, Part 1: Dimensions, tolerances and designation standard by Standards Australia, 02/13/2008
AS 681.4-2008 [ Current ] Elastomeric seals - Material requirements for pipe joint seals used in water and drainage applications, Part 4: Cast polyurethane sealing elements standard by Standards Australia, 02/05/2008
AS 681.2-2008 [ Current ] Elastomeric seals - Material requirements for pipe joint seals used in water and drainage applications, Part 2: Thermoplastic elastomers standard by Standards Australia, 02/05/2008
AS 2467-2008 [ Pending Revision ] Maintenance of electrical switchgear standard by Standards Australia, 02/05/2008
AS 2981-2008 [ Current ] High voltage a.c. switchgear and controlgear - Vacuum interrupters - High voltage testing - Protection of personnel from x-ray emission standard by Standards Australia, 02/05/2008
AS 4897-2008 [ Current ] The design, installation and operation of underground petroleum storage systems standard by Standards Australia, 02/05/2008
AS 681.3-2008 [ Current ] Elastomeric seals - Material requirements for pipe joint seals used in water and drainage applications, Part 3: Cellular materials of vulcanized rubber standard by Standards Australia, 02/05/2008
AS 4971-2008 [ Current ] Inspection and integrity monitoring of large steel vertical petroleum storage tanks standard by Standards Australia, 02/05/2008
AS 2658-2008 [ Pending Revision ] LP Gas - Portable and mobile appliances standard by Standards Australia, 02/05/2008
AS 1774.26-2008 [ Current ] Refractories and refractory materials - Physical test methods, Method 26: Creep in compression - Deformation under constant load and constant temperature standard by Standards Australia, 01/31/2008
AS 1448-2007 AMDT 1 [ Withdrawn ] Carbon and carbon-manganese steels - Forgings (ruling section 300 mm maximum) Amendment by Standards Australia, 01/31/2008
AS 2089-2008 [ Current ] Sheave blocks for lifting purposes standard by Standards Australia, 01/01/2008